Myvapesite: Your bestE-cigarette shop

Filling or refilling your vape tank is an important part of your vape experience. If you are a new user, this may seem daunting.

However, in reality, filling your vape tank is a simple process, which should be as user-friendly and effortless as possible. Although there are some differences between each brand and type of tank, The process for filling an e-cigarette tank is largely the same.

Our guide is intended as a general reference and covers the two most common types of tanks – Top-fill e-cigarette tanks and bottom-fill e-cigarette tanks. Although this guide is not exhaustive, but gives you a sufficient overview of the general process. If you have questions about a specific tank, Of course you are welcome to contact us! With that being said, let’s dive in.

Independently of, Which filling method you use for your tank, there is a common first step: You must first unscrew the rest of the vape kit from the vape. (Mind you: If you have just purchased a replacement tank yourself, You can of course ignore this step!)

How to fill an e-cigarette tank from the top?

Step 1.

Unscrew the airflow base at the bottom of the tank and carefully pull the e-cigarette coils out of the tank.

Step 2.

Add a few drops of e-liquid to the coil of your e-cigarette. Gently soaking the coil will help extend its lifespan. Then insert the coil back into the tank.

Step 3.

Unscrew the top connector from the tank, and you should be able to see an access hole for dripping the fluid.

Fill the tank with liquid, until you reach the point, which indicates, that the tank is full. (Be careful at this stage, that no liquid gets into the middle pipe of the tank, as this is the passage for the steam).

Step 4.

Once the tank is filled, tighten the top connection again, reinsert the coil and then retighten the bottom connector.

Step 5.

Wait 2-3 minutes, until the coil has filled with e-liquid. Your tank is then ready for use.

How to Fill the Bottom Fill Vape Tank

Step 1.

Unscrew the bottom connector from the tank and carefully pull out the e-cigarette coils.

Step 2.

Add a few drops of e-liquid to the coil. Gently dipping the coil into the e-liquid helps achieve this, to extend their lifespan. Then insert the coil back into the tank.

Step 3.

Unscrew the bottom metal connector, to gain access to the tank chamber.

Insert the tip of your e-liquid bottle into the chamber and allow the e-liquid to flow out to the full tank mark.

(Be sure to, Do not spill liquid into the middle pipe of the tank, as this is the airway for inhaling the vapor).

Step 4.

Reassemble the water tank and tighten all connectors.

Step 5.

Allow the coils to saturate for a few minutes. Your tank is then ready for use.

Summary

As you can see, refilling the tank is no problem. This process, which is an essential part of your daily e-cigarette, was professionally developed, to be as smooth and easy as possible.

If you are new and want to learn more about tanks in general, read more in our blog. You'll find all the basics in there, that you need to get started, z. B. Descriptions of the different types of tanks and how to keep them clean.

Myvapesite: Your bestE-cigarette shop

Two different types of e-cigarette coils. Ultimate question. “Should I use a high or low resistance coil?“Whatever you decide, myvapesite has your back.

What is an e-cigarette coil??

The e-cigarette coil is one of the most important components in any e-cigarette kit. Every vaping device is built around a coil, which is safely hidden inside. The coil can be made from a number of different materials, but their purpose remains the same; she works with the wick (a combustible material, that is wrapped around the coil), to heat your e-liquid and create vapor. No matter, whether you buy a pre-filled device or plug in your own vape juice, the wick, usually made of cotton, holds the liquid of your choice, while the coil uses power from the device's battery, to warm yourself. The wick also heats up, because the coil touches the wick, which is soaked with the e-cigarette liquid.

This process turns your e-cigarette liquid into vapor, and if you wait five minutes, after loading the liquid and turning on the device, it should be ready for use. Coils don't last forever and need to be replaced or your vape kit will become unusable and the liquid will start to smell burnt.

Resistance 101

As already mentioned, depends on the type of e-cigarette coil, that you use, not just on the material, from which it is made, but also from their resistance. The last time, that you heard this word, was probably in science class, but resistance levels are a very important part of smoking e-cigarettes. Every electrical device has resistance and is there for that purpose, to protect us. Theoretically, we can load a device with too much electrical charge, which can be very dangerous, but if we introduce a resistor into the device through the coil, the current is reduced to a level, that we can safely use.

The resistance of a particular coil depends on two things: what material it is made of and how often the wire is wrapped around itself. Generally applies: The more tightly wound the wire is, the higher the resistance. Resistance is measured in ohms by devices, which are called ohmmeters and the names for the two types of e-cigarettes, Plus ohm and sub ohm, delivery. This shows, that resistance is an essential part of any type of e-cigarette, so factors such as the number of clouds, the temperature of the e-cigarette juice or the spiciness of the flavor affect it. This is often the reason, why experienced e-cigarette users want to make their own coils, as they can control the resistance of the wire and thus the quality of the e-cigarette.

Low resistance coil

Low resistance coils (often called sub-ohm coils) have a resistance of less than 1,0 Ohm, why she too “Sub-Ohm” be called. These coils are typically associated with more experienced e-cigarette users and are often used with more advanced e-cigarette kits. That's why, that the wick has a larger hole around the winding, regardless of the material, from which it is made, which creates a large amount of steam.

Inhaling vapor is slightly different than inhaling cigarette smoke and customers often find it very difficult, to adapt their inhalation to the e-cigarette, when they first start doing it. The vapor produced by the sub-ohm coil is warm and sounds similar to smoking, but offers a dry kick, which can be challenging for those new to e-cigarette smoking. For this reason, we do not recommend sub-ohm coils to new e-cigarette smokers, but there is no reason, why customers can no longer use these coils, as soon as they feel comfortable.

So that sub-ohm coils can produce a lot of vapor, the device must run at a higher performance. this means, that the batteries do not last as long as with plus ohm coils, which may be disadvantageous for some customers. Additionally, much of the e-cigarette liquid is converted into vapor, to create these fantastic clouds, so you can run out of e-cigarette juice very quickly.

Of course, sub-ohm coils are also suitable for VG-rich juices, which produce a very strong stream of steam. To achieve this, the winding and the wick have to work hard, what can lead to this, that both are faster than a juice with a lower VG. If you use e-liquids with a higher VG value, These are usually thicker than other juices, what means, that your liquid can stick to the coil and wick, which can lead to problems.

Not only, That the sub ohm vaper you need to think about buying new coils more often than the plus ohm e-cigarette, but you also need to understand the process of replacing coils as soon as possible. In summary you can say:, that it is best, to stick with plus ohm coils, but don't blame it on e-cigarette maintenance. Every e-cigarette smoker needs to take care of his kit, no matter whether it is a plus ohm- or sub-ohm e-cigarette. So if you like clouds, Sub-Ohm coils are definitely something for you.

Summary

I should go up- or use low-resistance coils?

The answer is: …… It's entirely up to you! We at myvapesite understand, that smoking e-cigarettes is an exciting journey, on which you have your device, Your taste and that, what works for you, get to know. However, we have some honest advice, which you can take to heart immediately.

Myvapesite: Your bestE-cigarette shop

From about 2004 More and more smokers switched to e-cigarettes and helped us, to get rid of classic cigarettes. And cheaper and more socially accepted, everything sounds great.

Tabakheizstab

Tobacco heating rods are tobacco sticks, who use tobacco, and all known toxins in tobacco can of course also be released when heated and absorbed by the body. Since there is no combustion process here, will be in that year, in which tobacco heating rods come here, causes a large proportion of harmful cancers, The harm to health is unknown due to a lack of research data.

E-cigarette

E-cigarettes do not contain tobacco, but a nicotine liquid is heated here, and there is no combustion process at all, but e-cigarettes are a little more precise in terms of the liquid used, mainly from water with different nicotine content, Propylene glycol glycerin, and of course different The taste and additive propylene glycol, Of course, the effects of long-term inhalation are still unclear. The nicotine, which actually triggers the addiction, is part of the liquid in different concentrations, which can of course continue to decrease over time.

Nicotine is also a poison, An overdose can cause nausea and drowsiness and, in extreme cases, even lead to symptoms of poisoning, and I consider e-cigarettes to be harmless to health, based on current data, to burn tobacco, and are estimated to be less than traditional cigarettes, much more, their harmful effects on our health and already known research A single lit cigarette can over 10.000 various substances, including hydrogen cyanide, bind. For me, e-cigarettes should have 1000 times less benzene and nitrosamines in tobacco types of nitrosamines than traditional cigarettes. E-cigarettes are certainly not harmless, they are not free of pollutants, they are not healthy. Of course we know too, that it may have no impact, because there is no long-term data, which can be discussed with you, and from my personal point of view, the bad reputation of e-cigarettes in Germany is not entirely understandable in other countries, for example. The UK is open to vaping and concludes, that the harmful health effects of vaping are approximately 95 % be valued lower.

Together with her, Anja Schiller did not hide this conclusion, which was also supported by the German Cancer Research Center, That means, we always know about e-cigarettes for smokers, who want to switch to e-cigarettes, because they are less toxic and carcinogenic, d.h. Carcinogens are not inhaled and should not be inhaled in the first place, because chemicals that are harmful to health naturally dominate here and it makes sense to me, so that a direct comparison with e-cigarettes appears to be better than conventional burning cigarettes. The second question is, to what extent e-cigarettes can help us now, Get rid of classic cigarettes, Here are expert opinions and current opinions, Research can confirm that e-cigarettes have good development potential

Summarize

Current smoking cessation guidelines, the German report, say, that e-cigarettes are less harmful to health than tobacco heating rods and traditional tobacco, and you can use less nicotine-containing liquids when using e-cigarettes

Myvapesite: Your bestE-cigarette shop

You check your inbox every day, whether couples or more emails are full, most of them are titled “how to do it right” “7 ways to success”. It's a fact, that most of us long for success or are marching toward success. In this article we will talk about e-cigarettes and health. Using an electronic cigarette instead of smoking contributes greatly to your health.

Additional work, the attempt, to start brainstorming, to have a massive discussion, all of this is driving you crazy and still letting your boss and your customers down. When you sit in the chair and think about such a bad outcome, you can't help yourself, to light a cigarette. Terrible behavior! Have you ever respected your colleagues around you? This bad situation only keeps you there, Smoking cigarettes or drinking alcohol, to numb your nerves and relieve pressure. Life could be so crucial, that you find out, that these exaggerations lead to this, that you have a weak body.

Honestly, Inefficiency takes you one step back from success, bad habits leave a bad impression on others. For example, smoking is not a good thing, that thousands of people are chasing, a bad habit, which many of us rarely say no to.

We understand deeply, how it plays out in the lives of smokers. There is always a way there. The emergence of electronic cigarettes largely solves this problem. A refillable device reduces waste, cannot keep up with tobacco. Stable aromas, the tobacco leaves cannot guarantee, let alone the different types of flavors. A variety of appearances of electronic cigarettes, connected to technologies, which are being further developed every day, satisfy people's growing demands. No ash, no tar, happy snorts are perfect for a good habit beginner.

What's more...

According to CDC statistics, over 1,000 people smoke every day in America 3.200 people among 18 their first tobacco years ago, and estimated 2.100 Adolescents and young adults, who were occasional smokers, become daily cigarette smokers. To tell you the reason, You just gave them an uncool example.

Myvapesite: Your bestE-cigarette shop

If you are an e-cigarette user, E-cigarettes are like your “sweet baby” and require careful care. Both hot and cold weather affect the effectiveness and lifespan of e-cigarettes. Because one of the first parts – the battery should not be exposed to too hot or too cold. Here are some suggestions to extend battery life.

When e-cigarette batteries are exposed to extremely hot temperatures, they will:

Stop working

Bulging or widening

Bubble and melt

Rauch, Cause sparks or flames

Even blow up

When batteries are exposed to freezing temperatures, the following things happen:

Components in the e-cigarette expand

E-cigarette freezes

When a cigarette is exposed to wet weather for a long period of time, Excessive moisture will cause major damage to the batteries and lower vapor capacity.

Why do extreme temperatures have a big impact on batteries?

Dramatic temperature fluctuations can affect the ability of the battery's electrons, which pose a major threat to the life cycle of your battery.

What causes batteries to explode?

When e-cigarettes explode in hot weather, The electrons are excited and the battery is burned at extremely hot temperatures, causing an explosion.

Things don't do with e-cigarettes

1. Don't leave it in the car, because the temperatures in the car are naturally higher than outside.

2. Do not leave it on a snowy day or other cold weather.

3. Never steam in the shower or other damp places.

Please store e-cigarettes at a normal temperature of 14 bis 86 degrees up. There are also some other tips for you, to keep the battery function safe.

1. Choose batteries with instructions

2. Don't buy extremely cheap, unbranded batteries

3. Select the charger specifically for the battery

4. Charge the battery in a place with a smoke detector and do not charge it over time.

5. Replace damaged or overcharged batteries with new batteries from the original manufacturer.

Myvapesite: Your bestE-cigarette shop

If you are switching from a traditional smoker to vaping, Your vaping experience may suddenly be interrupted by a terrible cough and sore throat. You may be wondering: “Is it a steam cough or a smoker's cough?”

These frustrating symptoms can occur with new vapers. Here are some causes and solutions, that will help you, to find out, what causes your cough and how to prevent it. But don't forget, that your cough may be caused by other problems. So it's best to see a doctor.

Strong throat hit

Fluid contains PG, VG or mixtures thereof. PG can cause a severe throat hit, but sometimes it can lead to this, that your throat becomes dry and scratchy. Some vapers are allergic to PG.

Solutions:

Reduce PG in e-liquid.

If you are allergic to PG, you can choose VG instead.

Nicotine strength

Inhaling too much nicotine can cause coughing and a sore throat along with feelings of lightheadedness or nausea. E-liquid contains varying levels of nicotine from high to low.

Solution:

Reduce your nicotine strength.

E-Cigarette styles

Puffing an electronic cigarette is completely different than smoking a traditional cigarette. When you take a deep, full drag like a traditional cigarette, you will suffer from the burning sensation in your throat and lungs.

Solution:

Regulate the voltage of your MOD to achieve a smooth vaping experience.

Frequency of smoking

Some e-cigarettes look similar to regular cigarettes, but you don't have to vape as frequently as you do when smoking.

Solution:

Find the appropriate frequency, to satisfy your nicotine need. Only you have control over it.

Dehydration

Exhaling water vapor removes moisture from the body, which leads to a dry mouth and throat.

Solution:

Have a drink, before using the electronic cigarette.

If you are a new vaper, who suffers from cough and sore throat, please don't give up and go back to smoking tobacco. In heavengifts there are solutions for all e-cigarette problems.

Myvapesite: Your bestE-cigarette shop

Building coils helps us, To save money, as it is much cheaper than purchasing pre-made coil heads. It's also a hobby, that is fun and that we are not only proud of, but we can also enjoy the fruits of their labor. However, it may be a little difficult for beginners. You want to build your own e-cigarette coils, but don't know, where to start? No problem. Here I will try, To give you some of that, what you need to know, to build a simple coil for your RDA. For the sake of beginners, I will only provide an example of a 1.2 ohm microcoil, which I have been using for a long time, as it is easy to build from scratch.

The materials needed to make the coils.

1. Ohm Reader

2.resistance wire: Kanthal or Nichrome (You can use different sizes of wire, if you decide, Build your own coil. You can choose between 22 g, 24 g, 26 g, 28 g, 30 g, 32 g and 34 g Select wire. The “g” stands for gauge. All these wires are available in Kanthal and other wire types, that are suitable for vaping, but for this article I will just 28 g Use Kanthal.)

3. Winding calculator (by adjusting variables such as wire size (28 g), Coil type (individually), Zielwiderstand (1,2 Ohm), Inner coil diameter (2 mm) and leg length (4 mm) this calculator tells you, how many turns need to be wound. Our 1,2 Ohm single coil required 8 convolutions.)

4. 2 mm small screwdriver

5. Additional small screwdriver for your RDA screws.

6. tweezers (preferably ceramic tips, to grab your coils while pulsing)

7. Small wire cutters or nail clippers

8. Scissors for trimming your cotton

9. Organic cotton

10. E-cigarette juice

Wind your coil.

Now, since you have all the supplies you need, it's time, to wind your coils. For this part you will need a small 2mm screwdriver and a resistance wire.

You should place the wire on the screwdriver near its handle and hold the end with your thumb. Then start, wrap the wire around the screwdriver, until you reach your goal 8 achieve revolutions. Do your best, to keep the packages as close together as possible without overlapping. After 8 Turns, the two terminals of the coil should point in the same direction.

Install your coil.

Next, you should pick up the RDA's build platform and loosen the post screws. You should place one lead of the coil in the positive post hole and the other in the negative post. You can then tighten the column screws. But don't overtighten or the wires in the post could be cut. After installing the coil, cut the wires as close to the post as possible.

Test your coils for shorts.

After making sure, that your coils are installed correctly, it's time, Test your coils for short circuits. You need to take the RDA and screw it onto the ohm reader and turn it on, to ensure, that the new coil is not short-circuited. The resistance shown by your ohm reader should be close to the target resistance of 1,2 Ohm lie. Unless, check your RDA's post screws, to ensure, that they sit tight, or check your atomizer, to ensure, that it is fully screwed into the ohm reader.

Test your coils.

If your coils are not shorted, you can move on to the next stop: Put your RDA back on your mod. You can then briefly trigger your mod, until the coil starts to glow. If your coil starts to glow, squeeze them lightly with tweezers. Repeat this process a few times, until your coils glow evenly from the center outwards.

Wick your coil.

You need a piece of organic cotton, that fits into your spiral, and leave half an inch of space on each side. It helps, moisten and twist the end of the wick. If it doesn't go through easily, this means, that your wick uses too much cotton.

On the other hand, if your wick slides loosely in the coil, this means, that there is not enough cotton. Once your wicks are through the coil, remove the wicks from each side and trim them.

Myvapesite: Your bestE-cigarette shop

There is no doubt, that e-cigarettes are much better and less harmful than smoking. If you switch from smoking to e-cigarettes, you can free yourself from the harmful chemicals and diseases, that are associated with smoking. However, the world of e-cigarettes is very extensive and diverse, is it normal, that you are a little overwhelmed when you first switch to e-cigarettes. That's why I would like to give you some useful tips here, so you can get the most out of your e-cigarette experience.

Tips for quitting smoking

The prices for e-cigarettes vary greatly. Many beginners don't want to spend too much money on their first devices. Some people even know, that their e-cigarettes are of inferior quality, but they don't care.

This is one of the most common mistakes, make the smoker, when they move on to vaping. This way of thinking is completely wrong, because low-end devices can hardly provide you with the smooth and pleasant vaping experience you expect.

Tips for vaping e-cigarettes

Firstly, it is best, if you buy your e-juice from a reputable manufacturer. If you choose cheaper liquids, you run the risk, Getting poor quality juices, that contain impurities. Therefore it is worth it, to spend a little more money, to buy a high-quality e-juice from a manufacturer with a good reputation. Next, you should shake your e-juice before use. This contributes to this, that PG, VG and nicotine are mixed correctly, so that you receive a high quality e-cigarette. Additionally, you should not store your e-juice in one place, where it is exposed to direct sunlight. Sunlight can reduce the strength of the nicotine in your e-juice. Last but not least, do not leave your e-juice bottle open for a long period of time. Otherwise, you will sacrifice the taste of your e-juice.

Smoking care tips

To ensure, that your battery and atomizer are working properly, You should always check your battery connections for fluid buildup. To do this, you need to unscrew the battery and check it, whether there, where battery and atomizer are in contact, deposits have formed. Use a cotton cloth, to wipe off deposits. Empty and clean your tank regularly, at least once a week, if you vape regularly. Otherwise there may be leaks, Deposits and bad taste occur. Also change your coils regularly, otherwise they can also affect your vaping experience. If you notice deposits on your coils or smell an unpleasant burning smell, it's time, exchange them.

Myvapesite: Your bestE-cigarette shop

With thousands of e-cigarette oils, that are available to choose from, It can be difficult for even the most experienced professional, to make a choice. If you are new to the world of e-cigarettes, it's easy, Being overwhelmed by the variety of e-cigarette oils available. Which option is right for you and how to choose the right e-cigarette oil for your taste? Today I'm going to break it down step by step, so you can find the right juice, to maximize your pleasure. Let's get started, and?

First, choose your genre.

As I mentioned earlier, There is a huge selection of e-juices. However, e-liquids can be broadly divided into six main categories, namely dessert, Grain, fruit, Menthol, Custard and tobacco.

So before you choose a vape oil, that suits your taste, you need to know first, which of the main categories you prefer based on your personal preferences and taste.

Then select your subtype.

Once you have decided on a main genre, The next step is to narrow it down and select a few sub-genres. If you e.g. B. Like desserts, You'll go for some dessert-like flavors like vanilla, Chocolate, Cream and blueberries decide, that fall into this main genre. In many online shops, the providers have usually already set up these main genres on their websites, which makes it easier for you, to find the sub-genres, that you like.

Then select your e-juice blend.

After you have decided on a subtype, it's time, choosing an e-juice blend. E-liquids are mainly made of propylene glycol (PG) and/or vegetable glycerin (VG), contain nicotine and have added flavors. PG transports the flavor of the juice more intensely and makes vaping stronger “throat hit”. VG produces little to none “throat hit”, but a big cloud. So if you like a stronger flavor and a stronger throat hit, then a high PG vape is probably better for you, but if you like more steam and less throat hit, then a high VG vape will give you a more satisfying experience.

Also choose your nicotine strength.

As for the nicotine, So you can usually decide for yourself, how much you need. E-cigarette oils usually come in different nicotine strengths, von 24 mg down to zero. As a rough rule of thumb:, that heavy smokers usually between 18 and 24 mg required, to meet their needs. Moderate smokers start with 12mg to 18mg, while light smokers usually prefer 3mg to 6mg. Over time, you can reduce your nicotine levels.

Finally, you should only choose reputable e-cigarette brands.

For every popular product on the market, there are top brands and budget brands. Electronic cigarettes are no exception. Although money always plays a role, you should pay attention to this, that your e-cigarette oil is safe and in a clean, sterile environment.

In most cases, the best vape oil brands are from reputable suppliers with clean facilities, Laboratory processes and good manufacturing practices. Would you rather have your vape oil made in a lab by a trained chemist or in a dirty basement by someone, who is not qualified? So pay attention when choosing your e-cigarette oil, that you choose a brand with a good reputation.

Myvapesite: Your bestE-cigarette shop

What is diacetyl and is it safe, Smoking e-cigarettes?

Diacetyl is a chemical flavoring agent, which is used by many e-cigarette oil manufacturers in sweetened e-cigarette oils such as candy, fruit- and cake flavors are used. This chemical is commonly used in microwave popcorn, to achieve a sweet buttery taste.

Among the employees of several factories, make the margarine flavors, was diagnosed with occlusion bronchitis, a severe lung disease, which is commonly called “Popcorn worker's lung” is known, since it first appeared with a former worker at a microwave popcorn factory in the USA. Das National Institute for Occupational Safety and Health (NIOSH) has therefore pointed this out, that prolonged heating and inhalation of diacetyl can be harmful.

Cases of this respiratory disease have been reported in young people, healthy, non-smoking men.

“I agree though, that we should know, whether e-cigarette oils contain diacetyl and acetylpropionyl, but I have to point this out, that this study leaves out some very important points. One is this, to evaluate the values ​​found in their samples”, said cardiologist and e-cigarette researcher Dr. Farsalinos.

According to Farsalinos, the diacetyl levels are “absolutely minimal and do not raise any concerns about the impact on human health”. Farsalinos also noted in his blog, that the authors of the study “did not mention the presence of these compounds in cigarette smoke”.

Diacetyl was in 39 of the tested perfumes were found to be above the detection limit in the laboratory. Ethylene coupling and 2,3-pentanedione were in 46 or. 23 Perfumes detected.

This worrying issue is not entirely new to e-cigarette users. In a publication from the year 2014 was determined, that diacetyl is present in many samples of sweetened e-cigarette liquids, albeit in a concentration 100 times lower than tobacco smoke. The study concluded, that diacetyl “poses an avoidable risk to e-liquids and that the industry could take action, to prevent its use, without restricting the availability of flavors”.

Myvapesite: Your bestE-cigarette shop

Given the popularity of e-cigarettes, there are so many e-cigarette brands in the market, that the choice can be difficult, above all, if you order online and take the risk, Buy a fake e-cigarette. To avoid, that you are spending your hard-earned money on counterfeit e-cigarettes, We have summarized a few tips here, how to recognize a fake e-cigarette.

1.dirt cheap prices

It's understandable, that you want to buy a high quality e-cigarette device at an affordable price. But when searching for the e-cigarette brand, that you want to buy, you have to be careful, when prices vary greatly. Typically, most e-cigarette brands have an official website, where you can find out the prices of their e-cigarette products. So if you know, that the official price at 80 Dollar lies, and then you find a product online, the 20 dollars costs, it is undoubtedly a fake. Nowadays it is quite common, that unscrupulous retailers buy counterfeit products for a far lower price than the manufacturers and then put the same label on them as the original products. So keep that in mind, that a dirt-cheap e-cigarette is probably a fake.

2.View packaging

Most well-known e-cigarette manufacturers usually offer beautiful gift boxes, to give your products a high-quality look. That's why you should receive your e-cigarette with all components perfectly equipped in a branded gift box. If the e-cigarette is delivered in poor packaging, z. B. in a random box, it is probably a counterfeit e-cigarette.

3.Check the trademark/serial number

It is known, that almost every original product is marked with the manufacturer's trademark and a traceable serial number. There is no difference in the e-cigarette industry. These symbols represent the authenticity and quality of the brand manufacturer of the e-cigarette. Which company would be willing?, accept the loss of a counterfeit? There is none. So if you buy an e-cigarette without an identification mark or serial number, It is most likely a counterfeit e-cigarette.

4.Product quality control

Undoubtedly, the quality of the product is the most common complaint, that we hear. A real e-cigarette comes with all components, that fit together perfectly and smoothly. And no vape oil will leak. With counterfeit e-cigarettes, however, there are problems such as leaky atomizers, poorly fitting threads and loose buttons. When you receive your e-cigarette, you should therefore check each part carefully.

5.No guarantees or representations

Reputable e-cigarette retailers and manufacturers often offer one 7- or 30-day money-back guarantee, which is a good possibility, to insure the customer, that their products are genuine and reliable. In case you didn't know: Heaven Gifts is one of the companies, which always offers genuine e-cigarette products. So if you notice, that the e-cigarette, that you want to buy, has no real guarantee or warranty, you shouldn't trust your luck, because it is probably fake. It's obvious, that most counterfeit e-cigarettes are of low quality and offer no real guarantee.

The consequence of buying these cheap fake e-cigarettes is, that you run the risk of damage to your health. It also has a negative impact on the e-cigarette market, as some consumers start smoking again, after having bad experiences with counterfeit e-cigarettes. Therefore, be attentive and follow the tips mentioned above, when you purchase an e-cigarette device. Let's say no to counterfeits.

Myvapesite: Your bestE-cigarette shop

Expired liquids? This is how you recognize them!

Reports about liquids that have gone bad are rarely read or found. Most of the time a liquid expires simply because of this, when it has lost the taste of the aroma, that vaping is simply no longer fun - but vaping expired liquid is rarely a problem from a purely health perspective.

Fortunately, it can usually be seen with the naked eye, whether liquids or bases are actually no longer suitable for vaping. Basically, a good liquid should always be very clear. Is it milky?, cloudy, cloudy or streaky, then it should be disposed of as a precaution, unless, These signs are aroma-related and the seller has pointed them out to you.

There is an exception to this rule: Flavors are mainly stored in the refrigerator, Depending on the product properties, crystallization and clouding may occur. In this case, the bottle should simply be placed in a warm temperature of around 35° (not hotter!) Put in a water bath and shake after a while. Then it's clear again, It was not a case of contamination - and can be vaped without any concerns.

Nicotine can also oxidize. When opening liquid bottles or base bottles, oxygen can penetrate, with which the nicotine reacts and turns slightly brownish. However, this alone is not a cause for concern and does not reduce its quality or effect.

What should I keep in mind when mixing myself??

When it comes to self-mixed liquids, the likelihood of contamination and thus a limited shelf life is essentially dependent on hygienic care, with which is proceeded. Therefore you should vessels, Thoroughly clean syringes and containers.

DANGER: The following tips are NOT purely safety tips, but about hygiene measures. To get an impression of the necessary protective measures, you should take a look at the safety data sheet.

With the following tips you should optimally extend the shelf life of the liquids:

• All containers used, Squirt, funnel etc. should always be freshly disinfected. A pour of boiling water is enough, Sterilization with chemicals is not recommended. Basically, I always use a cheap ultrasonic bath - like this one.
• Only liquids should be removed from the large containers and what is not needed should never be poured back.
• Skin contact should be avoided. This works well when mixing using a fine balance and dripping instead of contact with the material.
• In the case of mixing water with pure glycerin, for example, it is the second safest option, Boil the water individually for each mixing process and then pour away any unused liquid, instead of purchased, Store fully demineralised water that has been preserved by UV radiation in the refrigerator and use it several times (Of course, the safest option is to use a pre-mixed glycerin-water mixture). Because no matter how germ-free it was – once opened, sterilization is over.
• After long-term storage, the aroma often comes from the refrigerator or cellar, the base but from the freezer. Then you have to wait before mixing, until the aroma and base have reached the same room temperature. One component is warm and the other is cold, the mix destroys the aroma.

Myvapesite: Your bestE-cigarette shop

How to store? Because the fact is:

Liquids are perishable.

Like with cosmetic products, Only a certain “pot life” is guaranteed with e-liquids. cosmetic products? And, because e-liquids consist of the same components as common cosmetics- and care products. Vegetable Glycerin, called VG for short, is glycerin obtained from a vegetable source and is subject to an expiration date. Glycerin is a type of alcohol, which occurs in almost all fats and oils (for example as cooling- and moisturizers in cosmetics). Like all fats and oils, VG goes rancid after a certain amount of time. To avoid that, There are a few things to consider when it comes to liquid storage.

Propylene glycol is usually found as an emulsifier in e-liquids due to its ability to mix. This turns water-containing mixtures into a reasonably stable compound. But propylene glycol also only has a certain half-life, before it “breaks”..

What to do?

Very easy: Use everything up! As stupid as it may sound: When the liquid runs out, is this the best way, to ensure a good e-cigarette experience. E-liquid is like food. Instead of buying it in bulk, Better enjoy it fresh.

What e-liquids and wine have in common

But there are also vapers, who let their liquids mature. Fast so, like good wine. The mixtures of PG, VG, Nicotine and flavors may change in intensity and taste over time. Taste nuances are often deliberately emphasized by vapers. Certain substances become more prominent over time, while others decay.

But such a sophisticated e-liquid is not for everyone. Most vapers still enjoy fresh liquids. To preserve this freshness for as long as possible, However, proper storage is crucial.

Cool, not cold

The liquids should be stored in a cool place. And that doesn't mean the refrigerator, Because cold also has a negative effect on the liquids. It is sufficient, store the liquids away from the heater.

The best sun protection…

... there is still a dark drawer for e-liquids, Because direct sunlight also has a negative effect on the liquids.

Myvapesite: Your bestE-cigarette shop

Nicotine salts – a real blessing or just one neue Liquid-Variation?

Lately we've been hearing more and more about great new liquids, which are intended to revolutionize nicotine consumption. We're talking about liquids with nicotine salts. From many quarters they are praised as a real blessing, as they make it easier for heavy smokers in particular to switch to e-cigarettes. On the other hand, they are suspected, particularly addictive and increasing the risk of overdose. reason enough, to take a closer look at the much discussed new substances. So that you know exactly, what you are dealing with here, we clarify in this article, what makes nicotine salts so special and what benefits they offer- and disadvantages you have to expect.

Nicotine salt – the longed-for solution for strong ones Smoker?

There is a strong trend in the e-cigarette market towards ever larger mods and more voluminous atomizers, who can do more and more and, above all, generate more and more steam. In this context, more and more liquids with a rather low nicotine content are being offered, Because with large amounts of vapor, more nicotine is naturally absorbed per puff. Additionally, higher concentrations cause a stronger throat hit – the tingling one, scratchy feeling in throat and throat, which is also caused by the smoke from a tobacco cigarette. At higher levels, a lot of nicotine tends to be unpleasant or even trigger a cough. Added, that nicotine also affects the taste of the liquid. Subohm steamers are included 3 – 9 mg of nicotine per ml is usually completely satisfied. Liquids with 18 or 20 mg Nikotin, which were very popular just a few years ago, are less in demand today and are no longer offered by some e-cigarette shops.

This trend is coming to people, who simply want to get away from tobacco with an e-cigarette, but not necessarily against it. Heavy smokers in particular need higher concentrations at the beginning, so that the same feeling of satisfaction arises, that the glow stems also produce. However, liquids with a lot of nicotine are hard to bear at higher performance levels. The consequence: Lower concentrations are vaporized, Those who want to switch are constantly attached to the e-cigarette and use a lot of liquid. Nevertheless, the desired satisfaction doesn't really arrive and so the pyro has to be used again.

Nicotine salts are supposed to help here. Liquids with nicotine salts can also be pleasantly vaped with a high nicotine content, without causing a noticeable throat hit or changing the taste too much. They also last longer, because the body cannot break down the nicotine bound in salt as quickly. However, this also delays the effect and the desired feeling of satisfaction only comes a little later. Nicotine salts are a welcome alternative to commercially available liquids? Let's take a closer look at the differences.

Free nicotine and nicotine salts: Production and effect

The nicotine, which is used for our well-known and valued liquids and nicotine shots, is nicotine in its purest form. The nicotine is extracted and released from the tobacco leaves using ammonia. This free nicotine quickly becomes gaseous, the body absorbs it well and it works very effectively. Together with a solution of propylene glycol (PG) and vegetable glycerin (VG), which serves as a carrier material, as well as some nice food flavors, it becomes a tasty liquid. Free nicotine is also found in tobacco cigarettes and many nicotine replacement products, like chewing gum, Sprays and plasters, to find. However, there is one crucial problem: Free nicotine has a high pH value, is therefore very alkaline or. basic. As a result, it irritates the mucous membranes and causes a strong throat hit when inhaled. So you can't vape free nicotine in too high concentrations, without it becoming uncomfortable.

Nicotine salts, on the other hand, correspond to nicotine, as it occurs in its natural form in tobacco. In this natural form it does not become gaseous so quickly, you would have to heat it very high, to make it steamable. For this reason, benzoic acid is added to the salts. It doesn't just take care of that, that the nicotine salts turn into vapor even at lower temperatures, it also lowers the pH, which makes the liquids more pleasant and gentle. This means that vapers can also inhale very high concentrations of nicotine, without your throat burning. Unfortunately, this nicotine bound in salt is not absorbed by the body as well as free nicotine - which can then be compensated for with a higher nicotine content. There is also a delay in effect, The desired nicotine rush only occurs after a few seconds, but it lasts longer. Liquids with nicotine salts are therefore more tolerable than those with free nicotine, but should be enjoyed with some caution, as the desired effect takes a while to arrive.

There is hype about JUUL & Co.

Liquids with nicotine salts have appeared in Great Britain and the USA, particularly as a result of POD systems. What exactly this is about, you can read about it here. Products like the JUUL or the Suorin Drop have caused a real hype there, because the liquid in the small, replaceable cartridges seems to work particularly quickly and effectively. But that's no wonder - because it contains up to three times as much nicotine as conventional liquids, cause at 50 mg per ml but just a throat hit like a regular one 6 mg Liquid. Poor absorption by the organism and a delayed feeling of satisfaction can of course be counteracted with correspondingly more nicotine. This is exactly why nicotine salts are assumed, particularly addictive. In Germany, however, the TPD2 has already put a stop to this trend, Because in the EU only liquids with a maximum are allowed 20 mg of nicotine sold per ml. Liquids in such high concentrations are therefore not available in this country.

Advantages and disadvantages of nicotine salts at a glance

Nicotine salts have a lot going for them due to their tolerability and their minimal impact on taste, but they also come with a few catches. The before- We have summarized the disadvantages and disadvantages of the new liquids here:

Advantages:

• Gentler effect: Even with a high nicotine level, no strong throat hit is noticeable, The scratchy throat and the urge to cough disappear.
• Better taste: Nicotine salts hardly affect the taste of the aroma, This means that even with a lot of nicotine you can enjoy unadulterated liquids.
• Longer storage time: Nicotine salts do not evaporate as quickly and oxidize more slowly than free nicotine. The liquids have a longer shelf life.
• fertility: Because liquids can be easily inhaled even with a high nicotine content, satisfy your nicotine addiction better. Less vaping is done and less liquid is consumed.
• Lots of nicotine with high performance: Due to better tolerability, higher nicotine concentrations can also be used in more powerful devices. Jaw steamers also require fewer puffs, until a feeling of satisfaction arises.

Disadvantages:

• Danger of overdose: It can happen due to the lack of a strong throat hit and the delayed effect, that too much nicotine is absorbed. The result is nausea, Headaches and dizziness. The best thing to do here is a glass of water and fresh air.
• Not suitable for subohms: With large quantities of steam, the risk of overdosing is particularly high. Liquids with a high nicotine content should therefore not be used in sub-ohm devices.
• Geringer Throat-Hit: And, that can also be a disadvantage, Because for many vapers, the throat hit is an important part of the enjoyment.
• Nicotine addiction: Many switchers reduce their nicotine content over time, because the throat hit quickly becomes too strong for them. In this way, they slowly wean themselves off nicotine and vape mainly for pleasure. With nicotine salts, this need does not arise and the vapers remain addicted to nicotine.
• Less choice: Liquids with nicotine salts are not yet particularly common in this country and are offered in a few popular flavors. Commercially available liquids, on the other hand, are available in a thousand or more different flavors.

If you would like to have the whole thing covered in a more scientific way, here is a very good video about it:

Myvapesite: Your bestE-cigarette shop

If you use a modern regulated battery module, do you have the possibility, to set different e-cigarette modes, with which you can change and optimize your e-cigarette experience. However, for many smokers this is more confusing than useful, because they don't even know, what the many different mod modes have to offer and how to use them. A lot of potential, that such mods offer, remains unused. So that you can and know how to use your BoxMod optimally, what's inside him, we give you an overview of the current mods, which are available for today's battery modules, and explain, what they are and what they can be used for

Set the desired mode on the battery carrier

You can see on the battery module display, which mode is currently set. Many modules allow you to change modes, by briefly pressing the power button three times and then using the directional buttons to select a new mode from the menu.

The choices are usually：

Variable power mode (VW or POWER)

Variable voltage mode (VV)

Temperature mode (TC, VT or TEMP)

Start or Smart mode (SMART or S)

Counterclockwise mode

Color temperature mode

TCR-Modus (M1, M2, M3)

Press the power button again, to confirm your selection. The new mode should now appear on the display. Of course, the operating functions vary depending on the manufacturer and model. A look at the user manual will give you information about this, how to set the vape mode on the battery module. You can almost always find these on the manufacturer's website online.

Variable power mode for battery mods

Probably the most popular and frequently chosen mode for BoxMods today is Watt mode. It is easy to use, so that even newcomers can quickly get used to them, and reliably delivers good performance when set correctly, with which even long-time e-cigarette users are satisfied. So if this is your first time holding a regulated module with different vaping modes, We recommend you, Try the Watt mode first. You will soon achieve convincing results.

Watt mode is suitable for all e-cigarette users, who want to make their e-cigarette experience as easy as possible, without having to deal with complicated settings, but still want to determine the performance of their e-cigarette themselves.

Use your module's watt mode correctly

In Watt mode you can easily adjust the burning power of the atomizer head in the atomizer. The module provides the voltage regardless of the resistance of your power coil (in Volt) automatically like this, that the set power in watts is always achieved. The watt mode is therefore suitable for almost all types of evaporator heads.

But beware: Too much current can damage the atomizer head and make it unusable – the steam tastes burnt, or it simply no longer evaporates. To avoid this, you should stick to the recommended performance range. The manufacturers of ready-to-use evaporator heads usually specify the watt range, in which the individual coils should ideally be used. The maximum value should not be exceeded.

The motto applies here: set as many watts, that the mod evaporates well and achieves a good taste and a pleasant tingling sensation, but don't overshoot the mark! More watts means more steam, but that doesn't necessarily improve the taste.

To find the right wattage for your battery module, We therefore recommend you, Start with the lowest possible value and then gradually increase the power, until you find your personal sweet spot.

Variable voltage mode on the battery carrier

Variable voltage mode was the first setting mode, which was available to vapers and which could be adjusted using the small wheel on the first adjustable battery module. However, it is being used less and less, and many of the newer mod models no longer have voltage mode in the menu. We have included them for the sake of completeness.

Temperature profile of the battery carrier

Temperature mode is at least the second most popular mode. Here you can set the maximum temperature, to which the heating coil of the coil should be heated. The module regulates the power output like this, that the maximum temperature cannot be exceeded. On the one hand, this has the advantage, that your box does not constantly fire at full power and thus protects the batteries. On the other hand, you can fully enjoy the flavor spectrum of the liquid, as the flavors have different flavor nuances at different temperatures.

Your mod does not determine the temperature of the electrical wire with a thermometer, but calculated, how the resistance of the wire changes when heated. Therefore, not all wire types are suitable for temperature modifications.

Correct use of battery module temperature mode.

The most common wires for temperature mode are stainless steel (V2A or V4A), Titan- and nickel wires. For this reason, most modules are available in three temperature modes: SS for stainless steel (stainless steel), TI for titanium and NI for nickel. These three types of wires change their resistance in different ways when exposed to heat and therefore have different temperature coefficients. These are already preset in the corresponding mode, so all you have to do is choose the right wire. The names of the different battery carrier modes and their selection can be found in the operating instructions in the menu. You can learn more about the different wires and their properties in our article on DIY wires.

So that your module can measure the output resistance correctly, is it important, to choose the right wire. For ready-to-use atomizer heads, this is specified by the manufacturer. In addition, all materials must be at room temperature. Therefore, you should let the e-cigarette cool down, before setting the temperature mode, otherwise measurement errors may occur. The temperature displayed by the module may not be correct. The evaporator should already have cooled down, when you insert the new evaporator head.

To find the right temperature for your best e-cigarette experience, we also recommend here: Start with a lower value and increase it slowly.

Bypass mode for modules

In bypass mode, your BoxMod simulates the behavior of a mechanical module. Unlike regulated modules, these MechMods have no controls- or protective electronics and only pass on the existing output voltage to the heating coils of the evaporator head. The amount of steam depends on the resistance of the coil. As the battery charge decreases, the voltage provided and thus the performance decreases over time. In bypass mode you can see, how it works with mechanical modules, without relying on protection against short circuits, Deep discharge, Reverse polarity or overvoltage. That's why, that you can't turn it off in any mode with a regulated battery carrier.

Correct use of your module's bypass mode.

It is important, that your current atomizer head can handle the performance. Otherwise, don't think about it too much – Simply set the bypass mode and start vaping your e-cigarette!

Start-up- or smart mode for mod

The start-up- or Smart mode is still a fairly new invention and is therefore mainly used in newer battery mod models. With some older modules it is possible, Start- or install smart modes via software updates from the manufacturer. These module modes were developed, in order to make dealing with the supervised modules as quick and easy as possible, especially for beginners.

In the starter- or Smart mode, the module automatically detects the resistance of your current atomizer head and automatically sets the recommended power (in Watt) a. You can then adjust this value up or down, similar to Watt mode, and also store it with the help of some battery modules. For some modules you also have the option, Create different resistance curves in start-up mode or smart mode, so that your saved watt value is adjusted every time you change the evaporator head.

Use the start-up- or Smart mode of your module optimally:

Trust is good, but control is better: Today there are a large number of atomizer models and countless different atomizer heads on the market. It can happen, that the coils are not identified correctly or that the software makes measurement errors. Some voltage regulator modules also automatically select the maximum of the recommended power range.

That's why we recommend, the selected power mod with short, Test carefully with light puffs. If the taste is okay, you can cheer him on a little harder next time. Does the vapor taste strange or is it a bit smoky?? Then it's best to set a little less wattage on the battery carrier!

Counterclockwise mode on the module

The CCW mode (Custom Power Curve / Fully Controlled Power) gives you the opportunity, Customize your e-cigarette experience even more closely to your personal preferences. You can set here, How many watts your own battery module should deliver per second of vaping, and you can plan the power curve completely in advance.

If the power is increased gradually and the liquid is heated more slowly, you will get a richer taste, as more flavors can develop. Another advantage: You save money. Your module does not always start at full power, so it uses less electricity, which saves the battery. Your atomizer head also has to withstand less and lasts longer.

Correct use of your module's counterclockwise mode.

First, observe your migration behavior. Most smokers start with a softer hit and are strongest in the middle of the hit.

Assumed, Your turn lasts approximately 7 Seconds and is strongest in the seconds 4 and 5. Then set your preferred wattage for the seconds 4 and 5 a, z. B. 40 W, and select a lower power for all other seconds.

This is an example

Of course, you can also set very unusual power curves and create unusual vaping experiences. Try, which is possible, but pay attention, that you do not overload your atomizer head!

CCT mode for battery carriers

Similar to CCW mode, some modules are also in CCT mode (Custom Curve of Temperature / Complete Control of Temperature) available. With this battery mode, as well as with the CCW mode, You can plan your e-cigarette experience precisely and determine it yourself. Here you can set the maximum temperature, which the heating wire of the coil should reach in every second of pulling.

Here too, the advantages are obvious: more taste, Less power consumption and longer lifespan of the evaporator head.

Correct use of your module's CCT mode.

Because CCT mode is an extension of classic temperature mode, Of course, you need an atomizer head with a cable for temperature-controlled atomization.

Here too, you can experiment with different temperature profiles as desired. It is important, that the load limits of the coils are strictly observed.

TCR modes on modules (M1, M2, M3)

The TCR mode (Temperature Control by Resistance) is also a mode for temperature control when vaping. In contrast to the known temperature modes, no temperature coefficients are stored for the different wire types, but must be entered manually. To use TCR mode, you need to know the temperature coefficients of the wires and then enter them yourself.

This mode is therefore particularly suitable for technically savvy e-cigarette users, who like to move away from the usual standards and self-winding coils with unusual wire types, like silver plated copper wire or similar, want to use.

Correct use of the module's TCR mode.

TCR mode is typically divided into three subcategories (M1, M2, M3). So you can store the temperature coefficients for three different types of wire. You can find the temperature coefficients for the individual wire types from the manufacturer under the relevant information or through internet research. Some vape blogs and vape boards provide tables of temperature coefficients for different types of materials.

In TCR mode you normally have to 3 Digits below M1, Enter M2 or M3. It consists of the 3., 4. and 5. Place after the decimal point of the TCR value. A nickel wire (Ni200) hat z.B. a TCR value of 0,006000. So for this wire you give 600 a. How exactly you can set the TCR value on the battery carrier, You can find out more in the operating instructions.

As with regular temperature-controlled e-cigarettes, we also recommend this: It's best to start with low temperatures and slowly work your way to the sweet spot!

We hope, that with this overview we were able to shed some light on the steam modes and you might have a better idea, what your mod can do. We hope you enjoy trying out the different battery carrier modes and, above all,: enjoyable vaping!

Here's a nice video about temperature-controlled vaping from Phil

Myvapesite: Your bestE-cigarette shop

You've probably heard horror stories, in which e-cigarettes have exploded in people's faces, or you have seen posts on social media, in which this actually happened, and some of the horrifying photos, that will make you think twice, to buy an e-cigarette. This is one of the reasons, why my colleague doesn't buy e-cigarettes, and after I explained to him several times, that it is a rare event (according to Battery University, for example 1 von 10 millions) and that it too 100 % is avoidable, if you know anything about battery safety, he still smokes it to this day, as if they were less life-threatening than e-cigarettes.

• Cigarette batteries are no different from other batteries, that you use every day, knows from. B. the one in your cell phone, Computer or tablet. Surely my colleague isn't worried, when he holds a telephone device near his face? The difference is this, that your phone battery uses a lithium-ion battery, which is specifically tailored to the requirements of your device. It has become a trend in the use of e-cigarette batteries, Optimize and adapt e-cigarette devices, to get more power or clouds of smoke. Using a wrong/faulty/cheap battery with a wrong/faulty/cheap device is playing with fire and there is no need to be surprised, if you burn yourself.

There are both internal (also integrated) as well as removable batteries. This article focuses on removable batteries, because they are widespread. If you follow these battery safety tips, you can protect yourself additionally.

1. removable battery

These batteries are both economical and practical. If you are a passionate e-cigarette lover like me, You will probably have two batteries and replace them regularly. I'll do it, when one of the batteries is empty and needs to be recharged. When the removable battery reaches the end of its life, you don't have to buy a brand new e-cigarette, since you can only replace the battery.

2. the real deal

Always pay attention, that you buy an original battery. In this case it is not the right way, to do so, as if it were, until you make it. How can you be sure?, that you buy a real battery? Always use a trusted and well-known brand. They do not sell fake or cheap batteries.

3. Fee schedule

Familiarize yourself with the way, in which a specific device is charged. Some devices allow you to smoke without interruption, because you can use them, while the device recharges the battery. Other devices have an external charger, where you first have to remove the battery, before you can charge it. Personally, I own a device similar to the latter. I have two batteries, so that I can replace them if necessary.

4. the correct battery

Always pay attention when replacing batteries, What type of battery your device should use. Some e-cigarettes are more compatible with ICR batteries, while others are more compatible with LiPo batteries. The golden rule is: Always use the same type of battery in your e-cigarette.

5. smart charger

We recommend getting one of these bad boys. It has many security features. For example, when the battery is fully charged, it switches off automatically, preventing overcharging or discharging. This increases the risk “Explosion” avoided.

6. high quality e-cigarettes

There are many affordable ones, high quality e-cigarettes from well-known brands. Remember that, that you don't have to buy the cheapest product, because your safety could be at risk! Buying a high quality e-cigarette will significantly reduce the risk of an explosion.

7. Battery cabinets

When traveling, the batteries must be kept in your suitcase. Batteries can be dangerous if left loose in a backpack or bag, since they connect the circuit between plus- and negative pole can close, if they are made with metal-like material (z. B. car key, Change) come into contact.

8. charging cable

Just like a cell phone charger slows down the charging process, if the wrong charger is used for the device, This also applies to e-cigarettes. Always use the specific charger, that came with your e-cigarette. Using a different charger with a different voltage may cause the device to overheat.

9. damaged batteries

If your e-cigarette battery no longer works like it used to, or if the pack is worn or damaged, maybe it's time, to buy a new set. Do not take any risks, if the batteries are defective. Dispose of them safely.

10. charge the battery

Although most modules come with a “Shutdown point” are equipped, We recommend you, Keep a close eye on your devices. Try, Avoid flammable materials such as curtains or cushions, and check regularly, to avoid overcharging. Try too, Do not leave your module in direct sunlight, even if it doesn't load.

conclusion

The best way, To ensure your safety and the safety of those around you, is, to inform yourself. When it comes to battery safety and knowing your e-cigarette, research is the answer. If you handle and use your e-cigarette with due care, will make your e-cigarette experience a pleasant one.

Myvapesite: Your bestE-cigarette shop

Sometimes using a vape device with a dirty tank or coil can be frustrating. Burnt hits, no noticeable taste, lack of performance. Let's be honest, Most of us have had tanks or coils like this before. Fortunately, there are a few options, how to clean your vape tank or coil, so that you can restore it and get a new one, can have a high-quality e-cigarette experience.

Let's start with this, how to clean an e-cigarette tank:

Be sure to, that you all juice- and remove flavor residues from your e-cigarette, before you start the actual cleaning process. Excess juice can be poured off, to remove him.

Then first disassemble your tank and remove the coil. Use caution during this process, as you need to reassemble the tank. Some parts may be difficult to unscrew or remove when disassembling the tank, so be careful!

Finally, remove the coil. The spiral is a small device, which consists mainly of wires and wicks. There is also some sort of absorbent material attached to the coil, most likely cotton. Handling the coil (We'll go into cleaning the coil later).

From here you can.

1. Soak the pieces in a bowl filled with warm water

2. Rinse the parts under the tap over low heat

If your device is more dirty than usual, you can always use some dishwashing liquid, so that the parts look smoother after cleaning.

After cleaning the parts thoroughly, you can dry them with paper towels and then let them air dry. When the parts are dry and there is no excess water, just assemble the parts and attach the water tank to the module.

Some tips, if you want to clean particularly dirty areas：

1. clean the water tank with vodka. Not only wonderful cocktails can be mixed with vodka, it is also an effective remedy, to clean the water tank and remove bad smells. Dampen a paper towel with vodka and scrub the parts. Afterwards, you can rinse it with water and let it air dry.

2. another method is this, the parts in propylene glycol (“PG”) to soak. Fill a bowl with PG and let your vape soak in the liquid for a while. Once the parts are clean, place them on a paper towel to dry.

• You can also use common household products to clean your tank. Baking soda is a very effective cleaning agent. Vinegar is also used to clean many appliances. Just pay attention, that you rinse the vinegar from the parts, otherwise the smell will persist.

How to clean an e-cigarette coil.

There are 2 Types of coils, rebuildable coils and replaceable coils.

The rebuildable coils require the user to install and core the suction coils themselves.

The replaceable coils (Coil heads for the tank) are housed in a small metal chamber with a suction core and as the name suggests, The user just needs to head all 3-4 replace weeks.

Let's start with cleaning rebuildable coils.

1. first remove the wick from the coil.

2. dry your coils lightly; do not overburn them (don't let them glow too much).

3. take the nozzle out of the mod and hold it under running water.

Now you can clean them with a toothbrush or a coil cleaning device (If necessary, you can even use cleaning products).

5. rinse again.

6. Dry dry your coils again, to remove any water drops.

If you just clean your coils, You may notice a decrease in the performance of your e-cigarette. It may lack flavor and not produce as large clouds as it once did, which may indicate this, that it is time, to replace the atomizer.

Cleaning the replaceable coils.

1. first soak the coil head in vinegar for a few hours, Soak in ethanol or cheap vodka.

2. Hold under running water and rinse well.

3. rinse again with distilled water.

4. blow through the open side of the coil, to force the remaining water through the core wick hole.

5. Set the coil aside, until all the water has evaporated.

Everyone can use interchangeable coils 3 bis 4 be exchanged weeks, to ensure, that your e-cigarette works as intended.

conclusion

It is important, that the parts are clean and in good condition, if you own an e-cigarette. Who doesn't want to taste strong aromas or enjoy a thick cloud of smoke? If you take care of these parts, you can make sure, that your e-cigarette works optimally.

Myvapesite: Your bestE-cigarette shop

• Cigarette enthusiasts build e-cigarette coils according to their taste, whether it's a huge cloud or the clear taste, that you are looking for, the structure allows the user, finding a balance and of course repetition and practice. It's also a hobby. Some people find it relaxing, to make their own coils. Plus, it's much cheaper than buying disposable coil heads every week. This article is about that, how to build/wrap e-cigarette coils.

Packages Required Accessories for Electronic Cigarette Coils

Although there are many high quality coil kits on the market, that offer you everything, what you need, but many of these items may already exist, knows from. B. a screwdriver. The following materials are required to wrap an e-cigarette coil.

resistance wire: Any electronic cigarette wire is suitable.

Flush cutter: a wire cutter, that can cut in tight spaces.

Ceramic tweezers: for holding the coils while pulsing.

Small metal rod: small screwdriver or wire wrapping tool.

Organic cotton: any moisture-regulating material.

Scissors: for cutting the cotton.

You can also purchase accessories such as an ohm reader for accurate resistance measurement or a coil template for winding the wire.

Miniature- and macro coils

The most common coil designs include the miniature coil and the macro coil, which are made in the same way – you just need to take a piece of wire and wrap it around a screwdriver, to wind a drill or a coil device. The only difference between the two is the size of the inner diameter of the coil.

For example

Micro: This coil construction has an inner diameter of 1mm – 2mm.

Macro: This coil design has an inner diameter of 2,5 mm and more.

Remember that: The larger the inner diameter of the e-cigarette coil, the higher the resistance. The thickness of the instrument used also affects the resistance: the thicker the instrument, the lower the resistance. If you are not familiar with coil winding, We recommend you, For your first e-cigarette coils, use a simple Kanthal 26 or 28 Gauge to use.

Using coil terminals

Coil clamps are a tool, that should help you with this, winding the perfect coil every time with minimal effort. They come with removable rods, which enable the user, to switch between rods for different wires and diameters. Winding coils with the coil device is very easy. There are many videos on the internet, that show, how to easily wind bobbins using the bobbin device. Please remember this, that this is not necessary and you can also use a screwdriver at home, to wind bobbins.

If you would like more information, you can watch the following video from Sherlock Hohms, in which he shows, how easy it is, Build/wind an e-cigarette coil using the coil template.

Double coil

Some vaporizers are designed for two coils, which usually means, that more steam is produced than with a single coil, but dual coils require twice the power. If you are building a dual coil, Be sure to, that the coils are identical in size and shape, so that they heat up and function properly.

Remember that, that when using double coils, the resistance of each coil should always be half that of two coils. For example, if you build a dual coil with two 0.6 ohm coils, should your structure 0,3 ohms. If you remove one of the coils, your resistance will rise again 0,6 Ohm go back.

Building coils for RDA

First, check the deck.

Check the size, to see, how big your building can be (remember that, that the coils should not touch the top cap, as this may cause a short circuit).

Determine, whether the atomizer is operated with one or two coils.

Check the position of the posts (some decks require the lines to point in the same direction, in others the opposite).

Some postless decks may require the lines to be cut beforehand.

Once you have determined the number and size of coils, you can wrap them and insert the cables into the post holes. Use the screws to hold them in place, and you can start with the core wick.

Australian Central Bank or RTA

They are very similar to RDA based systems, but also have their limits. In most cases there is no space for larger buildings. This applies here too: If you believe, that your coils will end up touching the top cover, choose a smaller diameter.

Myvapesite: Your bestE-cigarette shop

Some simple facts

Who smokes, has a 3 times higher risk, to suffer a stroke.

A single cigarette contains over 7.000 Chemicals

Smoking can reduce your life expectancy at least 10 reduce years

600 000 People die every year from passive smoking

80% of lung cancer deaths are a direct result of smoking

These are just some facts and figures, that highlight the dangers of smoking, which can be avoided by switching to e-cigarettes! We and many British officials think so, that this instrument, that could help millions of people, should be made available to the entire country. They will discuss it in London in November, whether e-cigarettes should require a prescription, and participants include health officials, Scientists and politicians. They won't just discuss it, whether to start prescribing, but also about it, whether e-cigarettes should be allowed in public places and what the long-term impact will be of smokers switching to e-cigarettes. E-cigarettes have saved millions of lives so far, So why stop it??

Myvapesite: Your bestE-cigarette shop

Today the tobacco industry is growing exponentially, and a large percentage of the world's drug users have turned to this rapidly growing industry, to have fun.

So what exactly is an e-cigarette??

E-cigarettes are the inhalation of vaporized substances, produced by electronic cigarettes or vaporizers. These substances can be in the form of e-liquid or even dry samplers.

In recent years, e-cigarettes have become increasingly widespread, if not even more widespread, and in addition to this growth, flavor classification has also improved. Of cannabidiol, commonly referred to as CBD, to nicotine-based flavors to THC (Tetrahydrocannabinol) – E-cigarettes are now more widespread and diverse than ever before. Users see it as a healthier alternative to smoking, a great way to relieve stress and perhaps a better option, to get high in a clean and healthy way.

However, the practice has become increasingly popular and widespread, to search for substances or compounds, that indicate drug use. Drug tests are conducted in different ways, some more invasive than others and for different reasons, all of which can have a negative impact on the life of the person being tested.

Can you fail a drug test with e-cigarettes??

To know, whether smoking an e-cigarette causes this, that you fail a drug test, you need the substance, that you smoke, Better understand the test and the path to passing the test. When you put all of this together, you will understand better, How, why and whether the substances, that you evaporate, failing or failing a drug test.

Evaporating substances

There are different substances, used in e-cigarette oils, but you need to understand and consider three of the most commonly used substances. They are.

Cannabidiol
This substance, often referred to as CBD, is an active component of cannabis and is commonly used, to renew nicotine-free flavors, specifically reduce stress and promote calm. Although it is not inherently psychedelic, it can still cause panic.

Tetrahydrocannabinol
THC is the main psychedelic component of cannabis and is a highly psychoactive compound, which has a psychedelic effect on consumers. THC is used by those, who want a light high in a clean and healthy way. Users even talk about one “clean and healthy high”.

Nicotine
Nicotine is often used for flavors, that resemble the taste and feel of a real cigarette. It is primarily used by humans, who try, to stop smoking, by gradually reducing their nicotine intake.

Although e-cigarettes contain some other ingredients, these are the three most common substances, that can affect drug test results.

Drug testing

Drug testing is primarily used by law enforcement agencies, sports associations and healthcare providers, to check and determine the status of people, whether they have used illegal substances in the past. Recently, however, more and more employers are leading, especially in the private sector and insurance companies, Drug testing of employees, applicants and potential customers.

Drug testing can be done in a variety of ways, z. B. through blood, Saliva-, Urine- and hair analysis. Although smoking an e-cigarette does not necessarily mean taking drugs, The test can sometimes still identify you as a drug user. It would be unfortunate, If you fail a simple drug test after smoking an e-cigarette and as a result miss a job opportunity or lose your job. That's why you need to know, how to pass the exam.

Beat the drug test

Although the above substances, used in e-cigarette flavors, considered healthy, They can still show up in drug tests. However, no one wants a positive drug test, especially not, if you know, that you smoked e-cigarettes. So how can you bypass the test?? It's very simple, but let's first look at the individual substances, because they have different residence times in the blood, Have saliva or urine.

Cannabidiol

CBD is an important topic in workplace drug testing. However, CBD itself is somewhat difficult to detect, as most drug test kits test for THC-COOH and other related compounds, not on CBD. However, if it is in large quantities of about 1000-2000 mg or more is consumed, it will show up on a drug test. The easiest way, Passing a drug test after smoking CBD oil, is taking a small amount of this substance or avoiding e-cigarettes for a day or two before the actual test.

Tetrahydrocannabinol

There is no easy way, to bypass this test, as it will appear and trigger a positive test. Depending on the amount of THC smoked, it can be between 3 and 77 Remain in the urine for days and in the blood for up to a week. In fact, it's the urine test, which can be your downfall, and he's not that easy to beat. To pass this test, you need to do a detoxification procedure a week before the actual test, to remove all traces of the drug from your blood and urine.

Nicotine

After smoking nicotine flavors, nicotine remains about 5 Days in the blood and 3 days until 3 weeks in urine, depending on, how much you smoke your e-cigarette. Each flavor has a different level of concentration, so that you 0 mg of the nicotine flavor must evaporate, before you can actually test it.

All in all I can say, that e-cigarettes are a great option, to be healthy, Reduce bad smoking habits and reduce stress at the same time. However, some of the ingredients in e-liquids can be misinterpreted in drug tests and have a negative impact on your life.

Even though smoking an e-cigarette is not the same as consuming drugs, can substances such as nicotine, CBD and THC in e-cigarette flavors trigger a positive test result. However, there are different options, deal with this situation, from reducing consumption to detoxification and even quitting smoking completely. If you follow these steps, it is unlikely, that e-cigarettes show up on a drug test.

Whichever path you choose, You know better now, what substances show up in drug tests and how best to pass them. This is how you can enjoy your e-cigarette, without worrying about the test and its possible results.